Where:  Utah
Products: AquaFir™ product line in charcoal color with wire brush texture for siding in cedar.
Product Use: 1×6 shiplap siding

While wood and metal are vastly different siding materials, they create an amazing project.  Using natural wood siding materials with something produced in a factory, enhance the curb appeal.  The look is modern, while emphasizing a natural rustic theme to create a warm look.  The horizontal shiplap combined with the vertical lines in the metal give the home a lot of texture in the varied siding materials.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line is offered in two wood species, Douglas Fir and Cedar.  All the products can be used for residential and commercial application.

Our pre-finished materials make a big difference in project quality, aesthetics and in timing.  The use of Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products:  ranchwood™ in prairie color with smooth texture using douglas fir wood.
Product Use:  1×8 horizontal shiplap

Siding material for a commercial structure must have functionality and fit into the area.  Selecting the type of siding will have many factors to consider;  where the building located, what is around the building now or in the future, and budget.  Balancing the desired look to the budget can be done with Montana Timber Products.  Offering five product lines in different price ranges and various wood species. Mixing wood siding with other siding mediums allows for a unique combination of textures, colors, and helps to balance the budget.  This can also be helpful to blend with surrounding buildings, while still creating a unique look.

Product specifications:
Montana Timber Products offers four product lines in douglas fir or cedar. Corral board is authentic reclaimed wood for the 5th product line.   Material is available in 4″, 6”, 8”, 10” and 12″ wide boards in random or exact lengths ranging from 4ft to 16ft long.  Select from 6 profiles: shiplap, shiplap with ¼ or 1/8” reveal, square edge, square edge lap, tongue and groove, and channel rustic.  Textures for AquaFir™ and ranchwood™ are smooth, wire brushed, circle sawn, hand hewn, and pioneer.  ranchwood™ Artisan is offered in ONE texture (raked). Charwood™ makes its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), and 2″ nominal sizing. Timbers, posts, and beams are offered in 3”,4” etc in lengths up to 38’.  All the materials are stained, textured, and profiled to each projects specification and sealed on all 4 sides with our seal-once sealant.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  Offering multiple product lines in two wood species in various grades, makes it easy to find what fits each project’s needs. Each product line can be used for:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.

Customers enjoy mill direct pricing, exceptional quality, flexibility with colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form:  http://www.montanatimberproducts.com/contact/

Where:  Montana
Products:  ranchwood™ in tackroom color with circle sawn texture, for the trim, siding, soffit, fascia, all in cedar.  The timbers are resawn, FOHC douglas fir in tackroom color.
Product Use:  1×4 vertical shiplap, 1×6 vertical shiplap, and 1×10 horizontal shiplap profile. 1×4,1×6 square edge material for window, door, and corner trim.  Gable accent 2×8 and 2×4 and 4×4 posts.  Soffit material: Breckenridge plywood 5/8”x4x8 panels.

Using the siding material on the garage doors transforms a bland door into a focal point.  Creating a finished look to create a nice impact effortlessly.  Cedar is lightweight, aesthetically pleasing for any style home. The durability and variety of grades (STK-select tight knot, CMG-clear mixed grain, CVG clear vertical grain) give homeowners many choices.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Customers enjoy mill direct pricing, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where:  Arizona
Products:  ranchwood™  in western color with wire brush texture in douglas fir.
Product use: 1×4, 1×6, 1×8 trim and fascia, 1×3 battens with 1×10 boards

Board and batten siding creates a weathertight siding choice.  The unique look of the doug fir board and batten profile offers a visually appealing and versatile style of siding.  The vertical installation creates character and shadow lines.  Board and batten siding can be used in a modern or rustic application, keep texture and design in mind to change the aesthetic.   Montana Timber Products offers boards in 3”, 4”, 6”, 8”, 10” and 12” widths to create unique looks with board and batten or board on board installation.   Also offered are circle sawn, wire brush, smooth, and raked textures, all to help design your dream project.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades of each wood species ranging from #2 or better and select tight knot to clear vertical and mixed grain material.  Seal-Once offers high-performance long-lasting waterproofing seal that is environmentally friendly non-toxic protection.  Finishing the boards and sealing them in a controlled environment allows for fast efficient installation when materials are delivered to the job site.   Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Utah
Products:  ranchwood™ product line for siding in three colors: eastern, prairie, tackroom  with trim in tackroom in douglas fir and wire brushed texture.  AquaFir™ product is used for soffits, the gabled front entry and extended gabled roof patio covers all in light brown using douglas fir wood and wire brushed texture.
Product Use:  1×8 shiplap using ranchwood™ colors: eastern, prairie, tackroom, 1×6, 2×12, 2×6, 2×4 trim and accents in tackroom, 1×6 tongue and groove soffit, gabled front entry and extended gabled roof patio covers in light brown.

At Montana Timber Products, we work hard to manufacture material that meets your needs and your creative inspirations.  Every project is made to order because every product is uniquely crafted for you.  Selecting a unique look for your home can be easy. Order samples today and let one of our representatives help you get started.  When using a custom pre-finished mill for interior or exterior materials you ensure a high quality, consistent and ready to install product.

Removing the on-site staining, sealing and clean up, saves money, time, and the environment.   A pre-finished product that is sealed on all sides, protects the wood from the elements.  Montana Timber Products semitransparent stain contains enough pigment to change the woods color to meet your design needs, but not enough to obscure the grain.  Site finished products are subject to the weather conditions and timing from installation.  Once installed matching weather to a paint crews schedule requires more time.  Which can leave your materials unprotected for extended periods of time.  Allowing wood to get wet and not dry out before staining and sealing it, is what causes the stain to not bond well.  Site finished wood, requires days of good weather to prepare for the stain, it should be cleaned and dry for 24-48 hours.  Once stain is applied it requires drying time, most stains require 10-12 hours of dry time.  The perfect forecast for 2-3 days all while arranging paint contractors and their schedules can be tricky.  A pre-finished, ready to install custom made product eliminates those headaches and improves the quality of the finished product.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include: siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Customers enjoy mill direct pricing, quick delivery, exceptional quality, flexibility to customize colors and profiles. Getting started is easy, call for information to find out which product line fits your project and budget.  Order free samples by calling or filling out the online form, we provide real wood samples, all to help you make your selection.   To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where:  Colorado
Products:  ranchwood™ Artisan product line in dusk color and raked texture using douglas fir wood.
Product use:  1×8 shiplap exterior siding, 1×6 tongue and groove soffit, gabled roof entry ceiling, interior ceiling and walls, 1×8 square edge Trim and accent use.

ranchwood™ Artisan series was inspired by our customers, the character of the wood with the depth of color is crafted into each board.  This house used the dusk color to accent ceilings, entries, and walls on the interior to warm the house and bring in a lot of character.  The exterior mixes the siding materials to create the perfect façade and make a bold statement with  a grand entry.  Be sure to check out the other great colors in the  ranchwood™ Artisan series:  http://www.montanatimberproducts.com/product-lines/ranchwood-artisan/

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Customers enjoy mill direct pricing, quick delivery, exceptional quality, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where: Idaho
Product: AquaFir™ siding in douglas fir square edge product in black color with wire brushed texture
Product use: 1×8 boards with 1×4 battens, a reverse board and batten application
Modern home with a farmhouse feel at 6200’ in the Teton Mountains. This home used douglas fir square edge siding for the reverse board and batten application with a metal roof and some metal accents.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives. Our ranchwood™, AquaFir™, Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials. All the products can be used for residential and commercial application. Each product line is offered in two wood species, Douglas Fir and Cedar. Seal once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection. Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project. Call 406-215-4961 for more information or fill out the contact form at: http://www.montanatimberproducts.com/contact/.

Where:  Ketchum, Idaho

What:  Limelight Hotel

Product:  Doug Fir ranchwood™ weathered  1×8 circle sawn, channel rustic profile

Product Use:  This beautiful new addition to the town of Ketchum lays in the heart of the valley and provides a host of additional amenities to the the Sun Valley area.  The Limelight Hotel is a great example of the mixed use of rock and wood to blend into the historic feel of Ketchum.

The circle sawn texture, channel rustic profile, and ranchwood™ finish results in a product that compliments the rock used throughout the building.  The color combination on this product is a mix of two custom colors specifically designed for this building.

Montana Timber Products is pre-finished with Seal-Once™, a water based high performance eco-friendly sealant which allowed for year around installation.

Montana Timber Products is a speciality wood products manufacturer of rustic wood siding, interior accents, reclaimed wood, barn wood alternatives with environmentally friendly manufacturing techniques. Visit our website, www.montanatimberproducts.com  to learn more about our product lines.

Where: North-Central California

What: Barn

Solution: 1×12 and 1×4 Board and Batten Siding

Product: ranchwood™ Eastern Exposure, Circle Sawn Texture

Barns are some of the most powerful cultural symbols of the United States of America. They were primarily designed and developed based on their intended use, the stone and lumber indigenous to their construction site, and the historic traditions of the various European settlers throughout Western expansion. Montana Timber Products, the sustainable building pioneers, offers multiple product lines to meet your rustic and contemporary barn needs.

The above photograph illustrates a fairly traditional Western or “prairie” barn. The designers chose Montana Timber Products’ ranchwood™ product line, Circle Sawn textured, and prefinished in Eastern Exposure, a color specific to the ranchwood™  line.

Montana Timber Products offers the nation’s leading reclaimed barn wood alternative. When compared to traditional reclaimed barn wood, Montana Timber Products prides itself on longevity, sustainability, and ease of install. All products produced by Montana Timber Products are prefinished with a NO VOC water sealant and UV protector. Additionally, structural consistency results in easy install, and waste is limited to 5-10%, relative to 30-40% loss with traditional reclaimed.

Whether you are looking for siding, beams, flooring, or interior accents, Montana Timber Products offers a solution for your rustic needs. All Montana Timber Products’ prefinished wood siding utilizes Seal-Once, a 100% NO VOC waterproofer with a 10 year limited warranty against water ingress.