Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Ohio
Products:  Charwood™ in midnight and tiger in cedar
Product Use:  1×6 shiplap siding in midnight, 1×6 and 1×12 square edge material for window, door and corner trim all in midnight.  1×6 tongue and groove soffit and ceiling in tiger.

This contemporary office space utilized two Charwood™ (Shou-Sugi-Ban) colors with white brick to create a dramatic exterior.  Sometimes soffits are just soffits, not a statement piece, this building the soffit is a statement.  Black and white is a classic clean lined contemporary look and setting that off with the tiger Charwood™ soffit adds the perfect flair to the building.  The added contrast works beautifully with this contemporary designed building. The 6” vertical shiplap accentuates the clean lines of the design.

Charwood,™  like all of our product lines can be used for timbers, siding, posts, beams, soffits, fascia, trim, paneling, and trusses.  Our materials are offered in two substrates: douglas fir and cedar, in various grades.  Every product ships directly to the jobsite stained, textured, profiled and sealed.  Creating the perfect exterior has never been easier with the choice of 40+ colors, 5 textures, and 7 profiles (shiplap, shiplap with 1/8 or ¼” reveal, channel rustic, board and batten/board on board, square edge lap and tongue and groove).  How do you get started?  Contact us today for free samples and get us your plans for a quote.  Call    406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products:  Charwood™ product line in sage color using cedar.
Product Use:  1×6 shiplap siding and soffit material

Shou Sugi Ban (Charwood™) siding creates a powerful visual expression in creating this mountain modern home. The vertical shiplap accentuates the clean lines of this homes design.  Incorporating wood and stone complement the subdued earth tones to fit into the natural aesthetic.   All Charwood™ products are burned, stained, and sealed for lasting protection in a controlled environment and shipped directly to the job site.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Offering five Charwood™ colors along with over 35 pre-finished stain colors in three additional product lines.  Each product line is offered in cedar and douglas fir in various grades of each wood species ranging from select tight knot to clear vertical grain product. Find out what fits your needs for design and budget by contacting us today. Customers enjoy mill direct pricing, quick delivery, exceptional quality, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where:  New Mexico
Product: AquaFir™ Charcoal color in cedar using circle sawn and wire brush texture
Product Use:  1×6 vertical shiplap (circle sawn texture), 1×8 horizontal shiplap (wire brush), 1×6 tongue and groove soffit and porch ceiling (wire brush), and square edge materials: 5/4 x 4 Trim, 1×12, 1×8 and 1×4 fascia (circle sawn)

MontanaTimber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial applications.  When partnering with Montana Timber Products for any project our pre-finished material makes a big difference in project quality, aesthetics and in timing.  All our products have a consistent, high-quality finish.  Also, the need for site finishing and all the headaches that come with it are eliminated.

Call  406-215-4961 or fill out the online contact form at http://www.montanatimberproducts.com/contact/  so that we can discuss our products and materials for your upcoming project.

Where:  Indiana

What: Events venue

Product:  Montana Timber Products ranchwood™ in douglas fir, wire brush Southern and black exterior trim with wirebrush Southern interior.  Vertical shiplap siding 1×10 and horizontal shiplap 1×6, 2×2 Trim and 2×6 fascia.  Interior wainscoting shiplap is 1×10 with 1×6 baseboard and 1×3 trim on wainscoting.

This whimsical rustic venue with a modern flair used a mixture of three wood colors to attain the perfect look for hosting any special occasion.  The horizontal and vertical use of the boards give the exterior definition and depth, while the darker trim pieces allow for contrast in the design.  The primary siding color, Ranchwood™ Southern, keeps very true to the barn rustic theme siding gives the appearance of aged barnwood, giving the look of reclaimed barnwood through our flagship product, Ranchwood.  The wood is easy to maintain with the Seal Once protective coating.  The dark trim, AquaFir™ Black, brings in a modern country tone to keep the venue elegant.   The touch of light wood accents used to create barn doors accentuate the rustic exterior.  The prefinished shiplap siding shows the simplicity of the barn’s architecture be keeping it all one color and letting the trim be the accent and focal point.  

Outdoor weddings are very popular and this venue wanted to create a modern barn with farmhouse qualities to facilitate large groups.  Beautiful settings that provide indoor/outdoor areas create a challenge for any decorator and party planner.  Keeping the venue with a simple elegance in tones that would match any style was necessary. 

The use of the shiplap wainscoting lining the interior walls give something more than white paint, keeping with the farmhouse rustic look, but modern enough to be formal if the venue calls for a different style event.  The use of the same color as the exterior, Ranchwood Southern, keep the simplicity of the design with the 1×10 boards keeps with clean lines and elegance in the interior.  This allows the room to be dressed up or down with other décor used for each event.  Trimming the room with the wainscoting is a lower maintenance design than plastered walls.  In a commercial venue the amount of abuse to the walls is easily disguised by this rustic wood aesthetic. 

No venue is complete without a gorgeous dressing room.  The true simplicity of the wood accent wall framing the dressing space is something to remember.  When decorating, keeping it simple and following the theme of the architecture throughout is away to create balance and elegance without trying too hard.

All materials are pre-finished and come ready to install.  Montana Timber Products feature Seal-Once allowing the beauty of the natural wood to shine through while being protected from the elements.