Products: AquaFir™ product line in driftwood wire brushed siding, soffit, fascia, trim, and timber. All in douglas fir.
Product Use: 1×6 shiplap with 1/8” reveal vertical siding. 1×8 shiplap with 1/8” reveal for garage doors. Soffit and overhang ceilings are 1×6 tongue and groove material. 1×8 fascia, 2×4, 2×6 window trim, 2×8 door and corner trim. Timbers 8×8, 3×4 and 4×4, all for the front entry.
AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…
In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation. In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage. Ask your sales representative for guidance to find what grade of wood and species best fit your needs.
Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials. All the products can be used for residential and commercial application. Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best. Call 406-215-4961 for more information or fill out the contact form at: https://www.montanatimberproducts.com/contact/.