Where:  Montana
Products:  AquaFir™ product line in shale colored siding with charcoal colored trim in wire brush texture. The porch ceiling is hazelnut colored with a smooth texture.  Wood substrate is douglas fir, all kiln dried.
Product Use:  1×6 shiplap (vertical) used in the gables, 1×8 shiplap with 1/8” reveal (horizontal), 1×6 tongue & groove soffit and porch ceiling, 2×6 window, door, and corner trim, garage trim and transition band at the gables are 2×8 square edge material.  Gable timbers and porch posts are 6x6x8 FOHC (free of heart center) kiln dried with re-sawn texture.

AquaFir™ is finished with a semi-transparent stain that doesn’t hide the grain.  This allows the natural wood product to create variation and be versatile for any design need.  SEAL-ONCE® is a water based clear sealant used to seal the entire board before leaving the mill.   All product lines are textured, profiled, stained, and sealed before shipping directly to the designated location.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc..  All the products can be used for residential and commercial application. Every order is customized authentic natural wood material.  Select your wood species, wood grade, color, texture, and profile with the help of our expert staff.  With 6 product lines, 7 profiles, 6 textures, 2 wood species in 3 grades, there is something for every design and budget.

Each product line is offered in two wood substrates, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best. Complimentary samples to assist you with color and texture selection. Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products:  AquaFir™ product line in white with circle sawn texture. Wood substrate is douglas fir, all kiln dried.

Product Use:  1×6 shiplap with 1/8” reveal horizontal siding.  1×4 window and corner trim.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc…

In extreme climates, acclimation and installation are crucial.  Montana Timber Products helps by stabilizing any board wider than 6” with relief cuts.  Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment, protecting the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in bronze cedar finish color and smooth texture.

Product Use:  1×8 horizontal shiplap with 5/8” reveal siding with 1×6 tongue and groove overhangs, and 2×12 rafter tails.  Wood substrate is western red cedar.

AquaFir™ can be provided in either douglas fir or cedar wood species.   AquaFir™ offers multiple texture options including smooth, wire brush, and circle sawn.  The smooth texture on this home refined the mountain modern design.  AquaFir™ is also offered in 17 color options.

We get asked all the time what the siding looks like after it is aging.  On this project, the siding was installed in April of 2018 and photographed August 2020.  The sealant (Seal-Once) and tint have UV protective properties to protect the color. Individual color retention will depend on the exposure to sunlight and other natural conditions.  Re-application of the tinted sealant should be applied typically every 4-7 years depending on the conditions and individual preference.   Seal-Once is water-based non-toxic, ultra-low VOC, and has low odor so it is safe and easy to reapply. Maintenance information can be found at:
http://www.montanatimberproducts.com/wp-content/uploads/2017/06/Montana-Timber-Installation-Acclimation-and-Maintenance-of-Wood-Products.pdf

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Wisconsin
Products:  ranchwood™ product line in three colors southern, western, yellowstone, and one AquaFir™ color shale for exterior siding and interior accents all in douglas fir wood.
Product Use:  1×6 shiplap (mixed equally in color) in wire brush texture.  Interior wall 1×4 shiplap (mixed equally in color) in wire brush texture.  The trim and doors are in southern color in 1×8 and 1×6 square edge material.  Faux beam wrap is all 1×10 and 1×8 material in southern color all in wire brush texture.  Window flower boxes are 1×8 shiplap mixed colors and trimmed in southern square edge boards.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Wyoming
Products:  AquaFir™ product line in driftwood wire brushed siding, soffit, fascia, trim, and timber. All in douglas fir.

Product Use:  1×6 shiplap with 1/8” reveal vertical siding.  1×8 shiplap with 1/8” reveal for garage doors. Soffit and overhang ceilings are 1×6 tongue and groove material.  1×8 fascia, 2×4, 2×6 window trim,  2×8 door and corner trim.  Timbers 8×8, 3×4 and 4×4, all for the front entry.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Utah
Products: AquaFir™ product line in charcoal color with wire brush texture for siding in cedar.
Product Use: 1×6 shiplap siding

While wood and metal are vastly different siding materials, they create an amazing project.  Using natural wood siding materials with something produced in a factory, enhance the curb appeal.  The look is modern, while emphasizing a natural rustic theme to create a warm look.  The horizontal shiplap combined with the vertical lines in the metal give the home a lot of texture in the varied siding materials.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line is offered in two wood species, Douglas Fir and Cedar.  All the products can be used for residential and commercial application.

Our pre-finished materials make a big difference in project quality, aesthetics and in timing.  The use of Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products: AquaFir™ product line in black color with smooth texture for siding, fascia, and trim in cedar.  Soffit and porch ceiling used black AquaFir™ 5/8”x48x96” wood panels and the 2^nd floor siding is reclaimed Corral board. AquaFir™  light brown timber pieces in douglas fir.

Product Use: 1×8 shiplap with 1/8” reveal for the first floor siding, 2^nd floor is 1×8 shiplap, window and door trim 1×4 and 1×8 fascia.

A cabin tucked away with a private hot spring designed with comfort and exclusivity.  Combining the black contemporary look with old corral board makes this cabin right at home in the middle of the woods.   Black cedar siding creates the clean lines, while the corral board finishes the look.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line is offered in two wood species, Douglas Fir and Cedar.  All the products can be used for residential and commercial application.

Our pre-finished materials make a big difference in project quality, aesthetics and in timing.  The use of Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Oregon
Products:  Aquafir™ in battleship color and ranchwood™ in southern for the siding material.  Trimmed with  Aquafir™ brown trim, fascia and soffit.  All the material is douglas fir with wire brush texture.
Product Use:  1×4,1×6, 1×8 in battleship and 1×10 shiplap in southern siding. 1×4,1×6 and 1×10 square edge material for window, door and corner trim all in brown.

Mixing sizes and colors for this vertical and horizontal shiplap siding helped create a subtle difference.  This traditional mountain style home is one of a kind.  The clean lines pay homage to its rural setting, while keeping the design exquisitely simple.  ranchwood™ product provides a reclaimed look while enjoying all the advantages of working with new wood.

Montana Timber Products is a specialty wood products manufacturer.  Creating rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board products offer a selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Texas
Products:  AquaFir™  product line in driftwood color with a wire brushed texture using douglas fir.
Product use:  1×8 shiplap vertically and 1×8 shiplap horizontally

The AquaFir™ product line is ideal when homeowners are looking for a consistent and uniform look, but still want the variation that natural wood offers.  Pre-finished material makes a difference with a high-quality finish, aesthetics, and timing of the project.    Prolonging the life of the siding is accomplished by preserving the wood with sealant to protect from weather and sunlight.  Applying the sealant in a controlled environment on all four sides of the boards treats the wood in the most optimal way.  Seal-Once penetrates the wood fibers and seals against moisture.  Wood expands and contracts with normal changes in humidity and temperature, by sealing each edge of the board normal weather changes do not affect the integrity of the siding.  Check out the other colors in the AquaFir™ product line at:  http://www.montanatimberproducts.com/product-lines/aquafir/

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar. Each can be used for siding, timbers, trusses, posts, beams, trim, fascia, soffit, interior paneling and ceilings or as an accent wall.  SEAL-ONCE® offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.  Order samples to get started today:
http://www.montanatimberproducts.com/order-samples/.