Where:  Oklahoma
Products:  ranchwood™ Artisan product line in Ash color with raked texture.  Substrate is kiln-dried Douglas Fir.
Product Use:  A combination of 1×3, 1×4, 2×3, 3×3 and 4×4 siding all in square edge profile.

A distinctive aesthetic was implemented for the exterior cladding of this Oklahoma City residence.  Overlaid square edge boards make up a grid pattern on the lower half of the home which is juxtaposed with the upper half clad in corrugated metal.  MTP customize milled all boards to the exact design specifications.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Texas
Products:  ranchwood™ product line in southern finish color with circle sawn texture. Wood substrate is douglas fir.
Product Use:  1×12 board and 1×3 batten and 1×6 trim.  8×12, 8×8, 4×8 posts in circle sawn texture all FOHC #1 kiln dried timbers.  Rafter tails 2×6 and 3×6 in douglas fir material. Garage door and barn door material is 1×6 and 2×6.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (douglas fir or western red cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Wisconsin
Products:  ranchwood™ product line in three colors southern, western, yellowstone, and one AquaFir™ color shale for exterior siding and interior accents all in douglas fir wood.
Product Use:  1×6 shiplap (mixed equally in color) in wire brush texture.  Interior wall 1×4 shiplap (mixed equally in color) in wire brush texture.  The trim and doors are in southern color in 1×8 and 1×6 square edge material.  Faux beam wrap is all 1×10 and 1×8 material in southern color all in wire brush texture.  Window flower boxes are 1×8 shiplap mixed colors and trimmed in southern square edge boards.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Northern Idaho
Products:  ranchwood™ Artisan product line in ash and glacier grey raked texture for siding and interior accent use all in douglas fir.
Product Use:  1×6, 1×8, and 1×10 mixed equally in ash and glacier grey shiplap vertical siding and interior use.

The ranchwood™ Artisan product line creates a reclaimed look with the contrasting highlights and character each color offers. This project mixed board widths and colors to create a unique aesthetic. The craftsmanship shown in the ranchwood™ Artisan product line is a multifaceted work of art. Using glacier grey and ash in three sizes on the exterior and interior of the home, create a unique aesthetic with subtle variations a natural wood product provides.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at: http://www.montanatimberproducts.com/contact/.

Where:  Kentucky
Products:  ranchwood™ product line in Northern and Western colors for siding in douglas fir wood.  Soffit material, garage doors, posts, and trim in Ebony color Charwood™.
Product Use:  1×10 channel rustic siding (northern color) in circle sawn texture and 1×8 shiplap siding (western color) in circle sawn texture.  Soffit 5/8” x 48”x96” plywood panels, 1×12, 2×4, 2×6, 1×4, trims, bands and faux beams all in douglas fir ebony Charwood™ color.  Patio posts all kiln dried ebony Charwood™ 8x8x8 douglas fir kiln dried material.

Kentucky’s bluegrass, bourbon, and Churchill Downs all pale to this home’s beauty.  This peaceful lakeside home exudes tranquility throughout.  Kentucky is known for hot, humid weather.  This builder kept that in mind with the stone at the ground level to offset the high dew level in Kentucky. Also providing adequate acclimation time all while selecting the right profile for the siding installation.  Montana Timber Products mills relief cuts on the back of boards to create air circulation behind the siding and help stabilize the board.  Sealing the entire board and providing touch up sealant for cut ends, ensures each board is protected from the elements.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  California
Products:  ranchwood™ product line in tackroom color with wire brush texture for siding, trim, and soffit materials all in cedar.
Product Use:  1×12 channel rustic vertical siding, 1×12 vertical shiplap siding, 1×12 garage cladding, 1×4 tongue and groove soffit, 1×12 garage trim, and 1×3 window and door trim.

This iconic location features the Hollywood sign as a neighbor and a great tranquil escape.  The modern house used wood siding and concrete to compliment the natural surround the hills provide.  Mixing a rustic element into the modern look softened the look and allowed the surrounding elements to create an urban feel away from the busy city below.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  This home combined channel rustic and shiplap profiles to create a unique one of a kind look.  The channel rustic profile leaves a 1” reveal between the boards (shown below).

When buying mill direct, ordering what you want is no problem.  Matching the trim, soffit and even garage material gives a cohesive look.  Select color, texture, profile, wood species, wood grade, and in the quantities needed for each project.   The materials are delivered directly to the job site stained, sealed, and ready to install.  To get started call 406-215-4961 or fill out the contact form at: http://www.montanatimberproducts.com/contact/

Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.