Where:  Northern Idaho
Products:  ranchwood™ Artisan product line in ash and glacier grey raked texture for siding and interior accent use all in douglas fir.
Product Use:  1×6, 1×8, and 1×10 mixed equally in ash and glacier grey shiplap vertical siding and interior use.

The ranchwood™ Artisan product line creates a reclaimed look with the contrasting highlights and character each color offers. This project mixed board widths and colors to create a unique aesthetic. The craftsmanship shown in the ranchwood™ Artisan product line is a multifaceted work of art. Using glacier grey and ash in three sizes on the exterior and interior of the home, create a unique aesthetic with subtle variations a natural wood product provides.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at: http://www.montanatimberproducts.com/contact/.

Where:  Wyoming
Products:  AquaFir™ product line in driftwood wire brushed siding, soffit, fascia, trim, and timber. All in douglas fir.

Product Use:  1×6 shiplap with 1/8” reveal vertical siding.  1×8 shiplap with 1/8” reveal for garage doors. Soffit and overhang ceilings are 1×6 tongue and groove material.  1×8 fascia, 2×4, 2×6 window trim,  2×8 door and corner trim.  Timbers 8×8, 3×4 and 4×4, all for the front entry.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Texas
Products:  AquaFir™  product line in driftwood color with a wire brushed texture using douglas fir.
Product use:  1×8 shiplap vertically and 1×8 shiplap horizontally

The AquaFir™ product line is ideal when homeowners are looking for a consistent and uniform look, but still want the variation that natural wood offers.  Pre-finished material makes a difference with a high-quality finish, aesthetics, and timing of the project.    Prolonging the life of the siding is accomplished by preserving the wood with sealant to protect from weather and sunlight.  Applying the sealant in a controlled environment on all four sides of the boards treats the wood in the most optimal way.  Seal-Once penetrates the wood fibers and seals against moisture.  Wood expands and contracts with normal changes in humidity and temperature, by sealing each edge of the board normal weather changes do not affect the integrity of the siding.  Check out the other colors in the AquaFir™ product line at:  http://www.montanatimberproducts.com/product-lines/aquafir/

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar. Each can be used for siding, timbers, trusses, posts, beams, trim, fascia, soffit, interior paneling and ceilings or as an accent wall.  SEAL-ONCE® offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.  Order samples to get started today:
http://www.montanatimberproducts.com/order-samples/.

Where:  Colorado
Product:  ranchwood™ and AquaFir™ exterior siding in douglas fir in Yellowstone color with pioneer texture, Southern color with circle sawn texture and Shale color with wire brush texture.
Product Use:  1×8 and 1×6 shiplap, 2×12 square edge siding for the pioneer texture.

At Montana Timber Products no project is too big or too small.  We work with the construction management team to manage the materials supply in a timely manner.  Whether your project is residential or commercial, big or small we provide custom pre-finished exterior and interior wood materials.  The W Hotel required more than 31,000 board feet of material in three textures, three colors, three size of boards and three profiles, by selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/