Where:  Idaho
Products:  ranchwood™ product line.  All siding and trim in Yellowstone color and fascia and soffit in Western color.  All material with wire brushed texture. Wood substrate is douglas fir, all kiln dried.

Product Use:  1×8 shiplap horizontal siding with accents of vertical board and batten (1×3 and 1×6).  Soffit is a 1×6 Tongue and groove.  The fascia is 2-step fascia with 2×4 over 2×10.

This home was designed to be cohesive with the natural beauty of its surroundings.  The coloring, texturing, profiles, and various dimensions can all be manufactured at one place, Montana Timber Products.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Oklahoma
Products:  ranchwood™ Artisan product line in Ash color with raked texture.  Substrate is kiln-dried Douglas Fir.
Product Use:  A combination of 1×3, 1×4, 2×3, 3×3 and 4×4 siding all in square edge profile.

A distinctive aesthetic was implemented for the exterior cladding of this Oklahoma City residence.  Overlaid square edge boards make up a grid pattern on the lower half of the home which is juxtaposed with the upper half clad in corrugated metal.  MTP customize milled all boards to the exact design specifications.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Kentucky
Products:  ranchwood™ product line in Northern and Western colors for siding in douglas fir wood.  Soffit material, garage doors, posts, and trim in Ebony color Charwood™.
Product Use:  1×10 channel rustic siding (northern color) in circle sawn texture and 1×8 shiplap siding (western color) in circle sawn texture.  Soffit 5/8” x 48”x96” plywood panels, 1×12, 2×4, 2×6, 1×4, trims, bands and faux beams all in douglas fir ebony Charwood™ color.  Patio posts all kiln dried ebony Charwood™ 8x8x8 douglas fir kiln dried material.

Kentucky’s bluegrass, bourbon, and Churchill Downs all pale to this home’s beauty.  This peaceful lakeside home exudes tranquility throughout.  Kentucky is known for hot, humid weather.  This builder kept that in mind with the stone at the ground level to offset the high dew level in Kentucky. Also providing adequate acclimation time all while selecting the right profile for the siding installation.  Montana Timber Products mills relief cuts on the back of boards to create air circulation behind the siding and help stabilize the board.  Sealing the entire board and providing touch up sealant for cut ends, ensures each board is protected from the elements.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Colorado
Product: AquaFir™ siding and trim in douglas fir, smooth texture in Black
Product Use: 1×6 shiplap, 1×4 door, window, corner trim with 2×10 accent trim over windows, doors and garage doors.

Montana Timber Products is the leading manufacturer of specialty pre-finished wood and reclaimed wood products. Our process allows us to customize each order to meet the customer’s needs. The extensive line of products include: siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking and glulam beams. Customers enjoy mill direct pricing, quick delivery, exceptional quality, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at: http://www.montanatimberproducts.com/contact/