Where:  Wyoming
Products:  AquaFir™ product line in driftwood wire brushed siding, soffit, fascia, trim, and timber. All in douglas fir.

Product Use:  1×6 shiplap with 1/8” reveal vertical siding.  1×8 shiplap with 1/8” reveal for garage doors. Soffit and overhang ceilings are 1×6 tongue and groove material.  1×8 fascia, 2×4, 2×6 window trim,  2×8 door and corner trim.  Timbers 8×8, 3×4 and 4×4, all for the front entry.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Oregon
Products:  Aquafir™ in battleship color and ranchwood™ in southern for the siding material.  Trimmed with  Aquafir™ brown trim, fascia and soffit.  All the material is douglas fir with wire brush texture.
Product Use:  1×4,1×6, 1×8 in battleship and 1×10 shiplap in southern siding. 1×4,1×6 and 1×10 square edge material for window, door and corner trim all in brown.

Mixing sizes and colors for this vertical and horizontal shiplap siding helped create a subtle difference.  This traditional mountain style home is one of a kind.  The clean lines pay homage to its rural setting, while keeping the design exquisitely simple.  ranchwood™ product provides a reclaimed look while enjoying all the advantages of working with new wood.

Montana Timber Products is a specialty wood products manufacturer.  Creating rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board products offer a selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Virginia
Product: AquaFir™ siding, trim, posts all in a custom color using a wire brushed texture on douglas fir wood.
Product Use: 1×12 square edge lap siding, 1×4, 1×6 and 1×8 trim, 1×10 fascia, 1×12 beam wrap and 2×4, 2×6, 2×12 for the gable trim.

This 79,000 square foot store required more than 17,000 board feet in a custom color to stay within the corporate guidelines specified by the architect. Montana Timber Products produced the pre-finished material in a consistent texture and color at our custom mill, where every project big or small is made to order.   Lead times are the best in the industry.

This retail store used custom materials with Montana Timbers Products to create their signature look. The siding is sealed on all four sides with Seal-Once, an environmentally friendly water-based sealant. Commercial and residential customers benefit from mill direct pricing, great lead time, on site delivery, exceptional quality, and the flexibility to customize colors. To get started on your project call 406-215-4961 or fill out the contact form at: http://www.montanatimberproducts.com/contact/