Where:  Vermont
Products:  Aquafir™ and Charwood™ product lines.  Siding and trim are a combination of Aquafir™ in Battleship color with wire brushed texture and Charwood™ in Midnight color. Wood substrate is Western Red Cedar, all kiln dried.

Product Use:  Siding is comprised of 1×10 vertical shiplap and 1×8 horizontal channel rustic profiles.  The two-step fascia consists of 5/4×4 and 5/4×10 square edge boards.  Window trim is 5/4×3 square edge material.  The patio posts and beams are wrapped with 1×6 square edge boards.

This inviting residence in the Green Mountains of Vermont was designed to be family friendly and highly functional.  Montana Timber Products materials serve to enhance the symmetry and balance of the design intent.  In the wetter climate of the eastern seaboard, acclimated Western Red Cedar is a great option for dimensional stability while offering inherent resistance to mold and decay.  The specific needs for this project in applications of siding, fascia, trim, and post & beam wrap were all custom milled under one roof, by Montana Timber Products.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Offering five Charwood™ colors along with over 35 pre-finished stain colors in three additional product lines.  Each product line is offered in cedar and douglas fir in various grades of each wood species ranging from select tight knot to clear vertical grain product. Find out what fits your needs for design and budget by contacting us today. Customers enjoy mill direct pricing, quick delivery, exceptional quality, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where:  Oklahoma
Products:  ranchwood™ Artisan product line in Ash color with raked texture.  Substrate is kiln-dried Douglas Fir.
Product Use:  A combination of 1×3, 1×4, 2×3, 3×3 and 4×4 siding all in square edge profile.

A distinctive aesthetic was implemented for the exterior cladding of this Oklahoma City residence.  Overlaid square edge boards make up a grid pattern on the lower half of the home which is juxtaposed with the upper half clad in corrugated metal.  MTP customize milled all boards to the exact design specifications.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in shale colored siding with charcoal colored trim in wire brush texture. The porch ceiling is hazelnut colored with a smooth texture.  Wood substrate is douglas fir, all kiln dried.
Product Use:  1×6 shiplap (vertical) used in the gables, 1×8 shiplap with 1/8” reveal (horizontal), 1×6 tongue & groove soffit and porch ceiling, 2×6 window, door, and corner trim, garage trim and transition band at the gables are 2×8 square edge material.  Gable timbers and porch posts are 6x6x8 FOHC (free of heart center) kiln dried with re-sawn texture.

AquaFir™ is finished with a semi-transparent stain that doesn’t hide the grain.  This allows the natural wood product to create variation and be versatile for any design need.  SEAL-ONCE® is a water based clear sealant used to seal the entire board before leaving the mill.   All product lines are textured, profiled, stained, and sealed before shipping directly to the designated location.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc..  All the products can be used for residential and commercial application. Every order is customized authentic natural wood material.  Select your wood species, wood grade, color, texture, and profile with the help of our expert staff.  With 6 product lines, 7 profiles, 6 textures, 2 wood species in 3 grades, there is something for every design and budget.

Each product line is offered in two wood substrates, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best. Complimentary samples to assist you with color and texture selection. Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products:  AquaFir™ product line in white with circle sawn texture. Wood substrate is douglas fir, all kiln dried.

Product Use:  1×6 shiplap with 1/8” reveal horizontal siding.  1×4 window and corner trim.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc…

In extreme climates, acclimation and installation are crucial.  Montana Timber Products helps by stabilizing any board wider than 6” with relief cuts.  Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment, protecting the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Texas
Products:  ranchwood™ product line in southern finish color with circle sawn texture. Wood substrate is douglas fir.
Product Use:  1×12 board and 1×3 batten and 1×6 trim.  8×12, 8×8, 4×8 posts in circle sawn texture all FOHC #1 kiln dried timbers.  Rafter tails 2×6 and 3×6 in douglas fir material. Garage door and barn door material is 1×6 and 2×6.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (douglas fir or western red cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in bronze cedar finish color and smooth texture.

Product Use:  1×8 horizontal shiplap with 5/8” reveal siding with 1×6 tongue and groove overhangs, and 2×12 rafter tails.  Wood substrate is western red cedar.

AquaFir™ can be provided in either douglas fir or cedar wood species.   AquaFir™ offers multiple texture options including smooth, wire brush, and circle sawn.  The smooth texture on this home refined the mountain modern design.  AquaFir™ is also offered in 17 color options.

We get asked all the time what the siding looks like after it is aging.  On this project, the siding was installed in April of 2018 and photographed August 2020.  The sealant (Seal-Once) and tint have UV protective properties to protect the color. Individual color retention will depend on the exposure to sunlight and other natural conditions.  Re-application of the tinted sealant should be applied typically every 4-7 years depending on the conditions and individual preference.   Seal-Once is water-based non-toxic, ultra-low VOC, and has low odor so it is safe and easy to reapply. Maintenance information can be found at:
http://www.montanatimberproducts.com/wp-content/uploads/2017/06/Montana-Timber-Installation-Acclimation-and-Maintenance-of-Wood-Products.pdf

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Wisconsin
Products:  ranchwood™ product line in three colors southern, western, yellowstone, and one AquaFir™ color shale for exterior siding and interior accents all in douglas fir wood.
Product Use:  1×6 shiplap (mixed equally in color) in wire brush texture.  Interior wall 1×4 shiplap (mixed equally in color) in wire brush texture.  The trim and doors are in southern color in 1×8 and 1×6 square edge material.  Faux beam wrap is all 1×10 and 1×8 material in southern color all in wire brush texture.  Window flower boxes are 1×8 shiplap mixed colors and trimmed in southern square edge boards.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Wyoming
Products:  ranchwood™  product line in tackroom color with circle sawn texture in douglas fir used throughout the exterior.
Product Use:  1×8 shiplap horizontal siding, 2×2, 2×4,2×6, and 2×12 used for trims, material, 1×6 tongue and groove for the entry ceiling, 5.5 x 14 x26, 5.5x12x14, 8x8x12 Glu Lam Beams as exterior accents, 4x4x10, 4x4x8, and 4x4x3, kiln dried douglas fir posts.

ranchwood™ by Montana Timber Products was the ideal material selection for this setting tucked in the mountains and along Flat Creek in Jackson Hole, Wyoming. This project utilized over 37,000 board-feet of wood, mixed with stone and other complimentary materials. A project of this scale benefits greatly from receiving pre-finished siding materials delivered to the jobsite, ready to install. When ordering pre-finished materials delivered to the jobsite ready to install, ensures quality and consistency for any size project.

At Montana Timber Products no project is too big or too small.  We work with the construction management team to manage the materials supply in a timely manner. Natural wood materials for exterior or interior are provided without the hassle of on-site staining. Montana Timber Products provides specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Kentucky
Products:  ranchwood™ product line in Northern and Western colors for siding in douglas fir wood.  Soffit material, garage doors, posts, and trim in Ebony color Charwood™.
Product Use:  1×10 channel rustic siding (northern color) in circle sawn texture and 1×8 shiplap siding (western color) in circle sawn texture.  Soffit 5/8” x 48”x96” plywood panels, 1×12, 2×4, 2×6, 1×4, trims, bands and faux beams all in douglas fir ebony Charwood™ color.  Patio posts all kiln dried ebony Charwood™ 8x8x8 douglas fir kiln dried material.

Kentucky’s bluegrass, bourbon, and Churchill Downs all pale to this home’s beauty.  This peaceful lakeside home exudes tranquility throughout.  Kentucky is known for hot, humid weather.  This builder kept that in mind with the stone at the ground level to offset the high dew level in Kentucky. Also providing adequate acclimation time all while selecting the right profile for the siding installation.  Montana Timber Products mills relief cuts on the back of boards to create air circulation behind the siding and help stabilize the board.  Sealing the entire board and providing touch up sealant for cut ends, ensures each board is protected from the elements.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  California
Products:  ranchwood™ product line in tackroom color with wire brush texture for siding, trim, and soffit materials all in cedar.
Product Use:  1×12 channel rustic vertical siding, 1×12 vertical shiplap siding, 1×12 garage cladding, 1×4 tongue and groove soffit, 1×12 garage trim, and 1×3 window and door trim.

This iconic location features the Hollywood sign as a neighbor and a great tranquil escape.  The modern house used wood siding and concrete to compliment the natural surround the hills provide.  Mixing a rustic element into the modern look softened the look and allowed the surrounding elements to create an urban feel away from the busy city below.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  This home combined channel rustic and shiplap profiles to create a unique one of a kind look.  The channel rustic profile leaves a 1” reveal between the boards (shown below).

When buying mill direct, ordering what you want is no problem.  Matching the trim, soffit and even garage material gives a cohesive look.  Select color, texture, profile, wood species, wood grade, and in the quantities needed for each project.   The materials are delivered directly to the job site stained, sealed, and ready to install.  To get started call 406-215-4961 or fill out the contact form at: http://www.montanatimberproducts.com/contact/