A modern cabin clad with distinctive Charwood

PROJECT DETAILS

Location
Washington

Project Type
Private Retreat

Applications
Soffit: Douglas Fir | Charwood | Tiger | 1×6” T&G
Interior Ceiling: Douglas Fir | Charwood | Tiger | 1×6” T&G
Horizontal Siding: Douglas Fir | Charwood | Tiger | 1×6” Shiplap
Vertical Siding: Douglas Fir | Charwood | Midnight | 1×4” Shiplap

Product

Charwood™ | Tiger & Midnight | Douglas Fir

THE VISION

The design intention of this structure was to create a modern cabin with blurred lines between inside and outside spaces.  Contrasting light and dark shou sugi ban was selected to energize the living quarters and calm the resting spaces.  The building location is perfectly situated on a bouldered bench in a secluded valley of Central Washington.

THE SOLUTION

Midnight and Tiger Charwood™ were intentionally selected for a distinctive natural interior and exterior envelope on this secluded cabin retreat. The divergent char colors of this shou sugi ban inspired product instills a stunning contrastive aesthetic that flows naturally with the beauty that surrounds it. The line between inside and outside is ambiguous, allowing a cozy inside feel while surrounded by a striking mountainscape.

LEARN MORE ABOUT CHARWOOD

Project Gallery

• 

• 

• 

• 

• 

From Common Facade to Rustic Showstopper

Project Details

Location
Minnesota

Project Type
Private Residence

Applications
Vertical Siding: 1×6″ and 1×8″ | Shiplap with ⅛” reveal
Horizontal Siding: 2×10″ | Wire Brushed

Product
ranchwood™ | Western + Tackroom + Yellowstone | Douglas Fir

The Vision

The owner of this Minnesota home wanted to transform a common engineered façade into a character-rich rancher home.

The Solution

This project utilized a variety of our mill capabilities with ranging textures, profiles, dimensions, and finish colorations. The vertical siding was both 1×6 and 1×8 boards milled in a shiplap profile with a 1/8” reveal and circle sawn texture. For the horizontal siding, they selected 2×12 boards in Pioneer texture.

This home had porch columns in place, so rather than replace them, we provided specified dimensioned materials to enable the fabrication of wood post wraps.

Vertical siding was used in the gables and was finished with a combination of tackroom and western colors.

Note: The 2×12 siding in Pioneer texture utilized chinking between the boards for a natural log appearance.  We can mill many variations of this look to meet your design scope without needing to build with full logs.  

LEARN MORE ABOUT RANCHWOOD

Project Gallery

• 

• 

Bringing Southern Hospitality to Idaho

Project Details

Location
Idaho

Project Type
Commercial

Application
Siding: 1×8 horizontal channel rustic

Product
AquaFir™ | Douglas Fir | White | Wire Brushed texture

THE VISION

Tupelo Honey serves southern foods with locations throughout the US. The atmosphere is warm and inviting, so natural wood cladding with a classic channel rustic profile was a perfect fit for the design of this restaurant.

THE SOLUTION

This Tupelo location sits on the second floor of a commercial building in downtown Boise. Our white colored finish is subtle and allows for natural wood grains to pop out. This soft wood tone is an excellent choice to counteract the hustle of the streets outside the balcony.

For the siding, they selected a channel rustic profile which is milled as a shiplap with a one inch reveal between the board faces. This design provides a shadowing effect, or otherwise breaking up the surface and creating more texture and space.

LEARN MORE ABOUT AQUAFIR

Project Gallery

• 

• 

• 

Deftly distressed wood cladding

Project Details

Location
British Columbia

Project Type
Residence

Applications
Siding: 1×10 and 1×8 board and batten
Fascia: 2×12 square edge boards
Window Trim: 2×4 square edge material

Product
ranchwood™ Artisan | Dusk | Pioneer texture | Douglas Fir

THE VISION

The stunning beauty of the Kootenay Rockies in British Columbia inspired the vision for a masterfully crafted residence that speaks to generations past. The intention was a harmony of new building materials with a look and texture of old world building methods.

THE SOLUTION

The client wanted the look of older hand textured wood with all of the benefits of using a new wood substrate. Our ranchwood™ Artisan was the perfect solution. For this house, the client selected our prefinished Dusk color and pioneer texture.

Our Pioneer texture is a heavily stressed hand hewn look with random cuts and adze markings.

LEARN MORE ABOUT ARTISAN

Project Gallery

• 

• 

• 

• 

• 

Where:  Washington
Products:  Aquafir™ product line for siding and trim in brown color with wire-brushed texture, all kiln-dried Douglas fir substrate.

Product Use:  Siding is 1×6 horizontal shiplap throughout the exterior.  Windows and doors are trimmed with 1×4, 1×6, 2×4 and 2×6 materials.  The garage doors are lined with custom milled 1×6.5” net width boards.

This northwest modern style home is located on the Columbia River with stunning unobstructed views of the high desert surroundings.  Montana Timber Products siding, and trim were a natural fit on this elegant residence with expansive windows and stucco cladding.  When unique specifications are integral to the design for interior or exterior wood components, Montana Timber Products shines.  We take pride in having the knowledge and mastery required to custom mill nearly any wood application requested by architects and designers.  Our materials arrive pre-finished, sealed, ready to be installed and beautify buildings.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line is offered in two wood species, Douglas Fir and Cedar.  All the products can be used for residential and commercial application.

Our pre-finished materials make a big difference in project quality, aesthetics and in timing.  The use of Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in black and natural colors with wire brushed finish.  Wood substrate is douglas fir, all kiln dried.

Product Use:  2×6 vertical shiplap siding, 2×3 square edge vertical rainscreen, 1×6 tongue & groove soffits, and 1×6 shiplap interior cladding on booths.

This popular Asian-fusion restaurant in Montana was relocated and modernized inside and out with Montana Timber Products materials.  The contrast in colors and applications with clean vertical lines creates an attractive modern appeal.  By design, the abundance of natural wood and light provide a warm, biophilic feel to the structure.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Vermont
Products:  Aquafir™ and Charwood™ product lines.  Siding and trim are a combination of Aquafir™ in Battleship color with wire brushed texture and Charwood™ in Midnight color. Wood substrate is Western Red Cedar, all kiln dried.

Product Use:  Siding is comprised of 1×10 vertical shiplap and 1×8 horizontal channel rustic profiles.  The two-step fascia consists of 5/4×4 and 5/4×10 square edge boards.  Window trim is 5/4×3 square edge material.  The patio posts and beams are wrapped with 1×6 square edge boards.

This inviting residence in the Green Mountains of Vermont was designed to be family friendly and highly functional.  Montana Timber Products materials serve to enhance the symmetry and balance of the design intent.  In the wetter climate of the eastern seaboard, acclimated Western Red Cedar is a great option for dimensional stability while offering inherent resistance to mold and decay.  The specific needs for this project in applications of siding, fascia, trim, and post & beam wrap were all custom milled under one roof, by Montana Timber Products.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Offering five Charwood™ colors along with over 35 pre-finished stain colors in three additional product lines.  Each product line is offered in cedar and douglas fir in various grades of each wood species ranging from select tight knot to clear vertical grain product. Find out what fits your needs for design and budget by contacting us today. Customers enjoy mill direct pricing, quick delivery, exceptional quality, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where:  Idaho
Products:  ranchwood™ product line.  All siding and trim in Yellowstone color and fascia and soffit in Western color.  All material with wire brushed texture. Wood substrate is douglas fir, all kiln dried.

Product Use:  1×8 shiplap horizontal siding with accents of vertical board and batten (1×3 and 1×6).  Soffit is a 1×6 Tongue and groove.  The fascia is 2-step fascia with 2×4 over 2×10.

This home was designed to be cohesive with the natural beauty of its surroundings.  The coloring, texturing, profiles, and various dimensions can all be manufactured at one place, Montana Timber Products.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Truckee, CA
Products:  AquaFir™ product line in custom color siding and soffit in smooth texture.  Wood substrate is Clear Vertical Grain Cedar.
Product Use:  1×8 tongue and groove with ¼” reveal for the horizontal siding. Soffit material 1×4 tongue and groove is all Fireline™.

Fireline™ treatment uses a vacuum pressure impregnation process to remove moisture and air from the wood cells and replace it with additives.  The fire treatment lasts the useful life of the wood product.  Fireline™ is a compliant option for homes in the Wildland Urban Interface (WUI) zone.  When projects require the extra protection Montana Timber Products offers a solution without sacrificing the character of the natural wood material.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in shale colored siding with charcoal colored trim in wire brush texture. The porch ceiling is hazelnut colored with a smooth texture.  Wood substrate is douglas fir, all kiln dried.
Product Use:  1×6 shiplap (vertical) used in the gables, 1×8 shiplap with 1/8” reveal (horizontal), 1×6 tongue & groove soffit and porch ceiling, 2×6 window, door, and corner trim, garage trim and transition band at the gables are 2×8 square edge material.  Gable timbers and porch posts are 6x6x8 FOHC (free of heart center) kiln dried with re-sawn texture.

AquaFir™ is finished with a semi-transparent stain that doesn’t hide the grain.  This allows the natural wood product to create variation and be versatile for any design need.  SEAL-ONCE® is a water based clear sealant used to seal the entire board before leaving the mill.   All product lines are textured, profiled, stained, and sealed before shipping directly to the designated location.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc..  All the products can be used for residential and commercial application. Every order is customized authentic natural wood material.  Select your wood species, wood grade, color, texture, and profile with the help of our expert staff.  With 6 product lines, 7 profiles, 6 textures, 2 wood species in 3 grades, there is something for every design and budget.

Each product line is offered in two wood substrates, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best. Complimentary samples to assist you with color and texture selection. Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.