Where:  Idaho
Products:  ranchwood™ product line.  All siding and trim in Yellowstone color and fascia and soffit in Western color.  All material with wire brushed texture. Wood substrate is douglas fir, all kiln dried.

Product Use:  1×8 shiplap horizontal siding with accents of vertical board and batten (1×3 and 1×6).  Soffit is a 1×6 Tongue and groove.  The fascia is 2-step fascia with 2×4 over 2×10.

This home was designed to be cohesive with the natural beauty of its surroundings.  The coloring, texturing, profiles, and various dimensions can all be manufactured at one place, Montana Timber Products.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Texas
Products:  ranchwood™ product line in southern finish color with circle sawn texture. Wood substrate is douglas fir.
Product Use:  1×12 board and 1×3 batten and 1×6 trim.  8×12, 8×8, 4×8 posts in circle sawn texture all FOHC #1 kiln dried timbers.  Rafter tails 2×6 and 3×6 in douglas fir material. Garage door and barn door material is 1×6 and 2×6.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (douglas fir or western red cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where: Wisconsin
Products:  ranchwood™ product line in three colors southern, western, yellowstone, and one AquaFir™ color shale for exterior siding and interior accents all in douglas fir wood.
Product Use:  1×6 shiplap (mixed equally in color) in wire brush texture.  Interior wall 1×4 shiplap (mixed equally in color) in wire brush texture.  The trim and doors are in southern color in 1×8 and 1×6 square edge material.  Faux beam wrap is all 1×10 and 1×8 material in southern color all in wire brush texture.  Window flower boxes are 1×8 shiplap mixed colors and trimmed in southern square edge boards.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Wyoming
Products:  ranchwood™  product line in tackroom color with circle sawn texture in douglas fir used throughout the exterior.
Product Use:  1×8 shiplap horizontal siding, 2×2, 2×4,2×6, and 2×12 used for trims, material, 1×6 tongue and groove for the entry ceiling, 5.5 x 14 x26, 5.5x12x14, 8x8x12 Glu Lam Beams as exterior accents, 4x4x10, 4x4x8, and 4x4x3, kiln dried douglas fir posts.

ranchwood™ by Montana Timber Products was the ideal material selection for this setting tucked in the mountains and along Flat Creek in Jackson Hole, Wyoming. This project utilized over 37,000 board-feet of wood, mixed with stone and other complimentary materials. A project of this scale benefits greatly from receiving pre-finished siding materials delivered to the jobsite, ready to install. When ordering pre-finished materials delivered to the jobsite ready to install, ensures quality and consistency for any size project.

At Montana Timber Products no project is too big or too small.  We work with the construction management team to manage the materials supply in a timely manner. Natural wood materials for exterior or interior are provided without the hassle of on-site staining. Montana Timber Products provides specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Oregon
Products:  ranchwood™ product line in Northern and Tackroom colors for siding in douglas fir wood.
Product Use:  1×6 shiplap siding and patio ceiling in circle sawn and smooth texture with 1×4 trim in smooth. The mixture is 60% tackroom in smooth, 20% circle sawn in northern and tackroom, and 20% in northern smooth texture.

Design and location are key in the retail brick and mortar space.  The architect’s creative design choices in mixing color and texture made for a warm welcoming space.  A pop of color and interest keep the space inviting all while keeping long term maintenance in mind.  The covered entry gives a warm aesthetic and invite customers to hang around.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Kentucky
Products:  ranchwood™ product line in Northern and Western colors for siding in douglas fir wood.  Soffit material, garage doors, posts, and trim in Ebony color Charwood™.
Product Use:  1×10 channel rustic siding (northern color) in circle sawn texture and 1×8 shiplap siding (western color) in circle sawn texture.  Soffit 5/8” x 48”x96” plywood panels, 1×12, 2×4, 2×6, 1×4, trims, bands and faux beams all in douglas fir ebony Charwood™ color.  Patio posts all kiln dried ebony Charwood™ 8x8x8 douglas fir kiln dried material.

Kentucky’s bluegrass, bourbon, and Churchill Downs all pale to this home’s beauty.  This peaceful lakeside home exudes tranquility throughout.  Kentucky is known for hot, humid weather.  This builder kept that in mind with the stone at the ground level to offset the high dew level in Kentucky. Also providing adequate acclimation time all while selecting the right profile for the siding installation.  Montana Timber Products mills relief cuts on the back of boards to create air circulation behind the siding and help stabilize the board.  Sealing the entire board and providing touch up sealant for cut ends, ensures each board is protected from the elements.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  California
Products:  ranchwood™ product line in tackroom color with wire brush texture for siding, trim, and soffit materials all in cedar.
Product Use:  1×12 channel rustic vertical siding, 1×12 vertical shiplap siding, 1×12 garage cladding, 1×4 tongue and groove soffit, 1×12 garage trim, and 1×3 window and door trim.

This iconic location features the Hollywood sign as a neighbor and a great tranquil escape.  The modern house used wood siding and concrete to compliment the natural surround the hills provide.  Mixing a rustic element into the modern look softened the look and allowed the surrounding elements to create an urban feel away from the busy city below.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  This home combined channel rustic and shiplap profiles to create a unique one of a kind look.  The channel rustic profile leaves a 1” reveal between the boards (shown below).

When buying mill direct, ordering what you want is no problem.  Matching the trim, soffit and even garage material gives a cohesive look.  Select color, texture, profile, wood species, wood grade, and in the quantities needed for each project.   The materials are delivered directly to the job site stained, sealed, and ready to install.  To get started call 406-215-4961 or fill out the contact form at: http://www.montanatimberproducts.com/contact/

Where:  Idaho
Products:  ranchwood™ in prairie color with smooth texture using douglas fir wood.
Product Use:  1×8 horizontal shiplap

Siding material for a commercial structure must have functionality and fit into the area.  Selecting the type of siding will have many factors to consider;  where the building located, what is around the building now or in the future, and budget.  Balancing the desired look to the budget can be done with Montana Timber Products.  Offering five product lines in different price ranges and various wood species. Mixing wood siding with other siding mediums allows for a unique combination of textures, colors, and helps to balance the budget.  This can also be helpful to blend with surrounding buildings, while still creating a unique look.

Product specifications:
Montana Timber Products offers four product lines in douglas fir or cedar. Corral board is authentic reclaimed wood for the 5th product line.   Material is available in 4″, 6”, 8”, 10” and 12″ wide boards in random or exact lengths ranging from 4ft to 16ft long.  Select from 6 profiles: shiplap, shiplap with ¼ or 1/8” reveal, square edge, square edge lap, tongue and groove, and channel rustic.  Textures for AquaFir™ and ranchwood™ are smooth, wire brushed, circle sawn, hand hewn, and pioneer.  ranchwood™ Artisan is offered in ONE texture (raked). Charwood™ makes its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), and 2″ nominal sizing. Timbers, posts, and beams are offered in 3”,4” etc in lengths up to 38’.  All the materials are stained, textured, and profiled to each projects specification and sealed on all 4 sides with our seal-once sealant.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  Offering multiple product lines in two wood species in various grades, makes it easy to find what fits each project’s needs. Each product line can be used for:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.

Customers enjoy mill direct pricing, exceptional quality, flexibility with colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form:  http://www.montanatimberproducts.com/contact/

Where:  Montana
Products:  ranchwood™ in tackroom color with circle sawn texture, for the trim, siding, soffit, fascia, all in cedar.  The timbers are resawn, FOHC douglas fir in tackroom color.
Product Use:  1×4 vertical shiplap, 1×6 vertical shiplap, and 1×10 horizontal shiplap profile. 1×4,1×6 square edge material for window, door, and corner trim.  Gable accent 2×8 and 2×4 and 4×4 posts.  Soffit material: Breckenridge plywood 5/8”x4x8 panels.

Using the siding material on the garage doors transforms a bland door into a focal point.  Creating a finished look to create a nice impact effortlessly.  Cedar is lightweight, aesthetically pleasing for any style home. The durability and variety of grades (STK-select tight knot, CMG-clear mixed grain, CVG clear vertical grain) give homeowners many choices.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  The extensive line of products include:  siding, trim, soffit and fascia, interior accents, timbers, fabricated trusses, decking, fencing, and glulam beams.  Customers enjoy mill direct pricing, flexibility to customize colors and profiles. To get a quote or more information call 406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/

Where:  Oregon
Products:  Aquafir™ in battleship color and ranchwood™ in southern for the siding material.  Trimmed with  Aquafir™ brown trim, fascia and soffit.  All the material is douglas fir with wire brush texture.
Product Use:  1×4,1×6, 1×8 in battleship and 1×10 shiplap in southern siding. 1×4,1×6 and 1×10 square edge material for window, door and corner trim all in brown.

Mixing sizes and colors for this vertical and horizontal shiplap siding helped create a subtle difference.  This traditional mountain style home is one of a kind.  The clean lines pay homage to its rural setting, while keeping the design exquisitely simple.  ranchwood™ product provides a reclaimed look while enjoying all the advantages of working with new wood.

Montana Timber Products is a specialty wood products manufacturer.  Creating rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board products offer a selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.