Where:  Montana
Products:  ranchwood™ Artisan product line in ash raked texture for siding, trim, and soffit, all in cedar.
Product Use:  1×4 shiplap with 1/8” reveal vertical siding and interior wall cladding. 1×6 tongue and groove soffit and 1×6 trim.

Montana Timber Products provides natural wood materials for both commercial and residential projects of all sizes.  Our supportive sales representatives will guide you through the material selection process so that you can build beautiful structures that also meet your schedule and budget.  At Montana Timber Projects, we thrive on understanding the unique needs of every project and crafting made-to-order materials for every customer.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Wyoming
Products:  AquaFir™ product line in driftwood wire brushed siding, soffit, fascia, trim, and timber. All in douglas fir.

Product Use:  1×6 shiplap with 1/8” reveal vertical siding.  1×8 shiplap with 1/8” reveal for garage doors. Soffit and overhang ceilings are 1×6 tongue and groove material.  1×8 fascia, 2×4, 2×6 window trim,  2×8 door and corner trim.  Timbers 8×8, 3×4 and 4×4, all for the front entry.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Oregon
Products:  ranchwood™ product line in Northern and Tackroom colors for siding in douglas fir wood.
Product Use:  1×6 shiplap siding and patio ceiling in circle sawn and smooth texture with 1×4 trim in smooth. The mixture is 60% tackroom in smooth, 20% circle sawn in northern and tackroom, and 20% in northern smooth texture.

Design and location are key in the retail brick and mortar space.  The architect’s creative design choices in mixing color and texture made for a warm welcoming space.  A pop of color and interest keep the space inviting all while keeping long term maintenance in mind.  The covered entry gives a warm aesthetic and invite customers to hang around.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Northern Idaho
Products:  Charwood™ silvertip siding and AquaFir™ black for trims in douglas fir wood.
Product Use:  Silvertip horizontal siding 1×10 shiplap and vertical siding is 1×10 and 1×6 board and batten.  The AquaFir™ black trim package: 2×12 belly band, 2×10 garage trim, 2×8 and 2×6 fascia, 2×4 corner, window, and door trim.

The use of wood with stone have been used in architecture since the beginning of time.  They create a refined look of sustainability.  This organic aesthetic creates a luxurious home with clean lines.  Wood and stone both come from the earth, giving a look of belonging.  Natural materials provide variation in the look and that mimics nature.  The use of two siding profiles (vertical board and batten and horizontal shiplap) creates interest and depth to the look.  The charred wood and black trim are complimented with the brown soffit, timbers, and rafter tails to warm up the overall look.

Visit our AquaFir™ page for colors and textures available:  http://www.montanatimberproducts.com/product-lines/aquafir/

Charwood™ can be found at: http://www.montanatimberproducts.com/product-lines/charwood/

Charwood,™  like all of our product lines can be used for timbers, siding, posts, beams, soffits, fascia, trim, paneling, and trusses.  Our materials are offered in two substrates: douglas fir and cedar.  Every product ships directly to the jobsite stained, textured, profiled and sealed.  Creating the perfect exterior has never been easier with the choice of 40+ colors, 5 textures, and 7 profiles (shiplap, shiplap with 1/8 or ¼” reveal, channel rustic, board and batten/board on board, square edge lap and tongue and groove).  How do you get started?  Contact us today for free samples and get us your plans for a quote.  Call    406-215-4961 or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Utah
Products: AquaFir™ product line in charcoal color with wire brush texture for siding in cedar.
Product Use: 1×6 shiplap siding

While wood and metal are vastly different siding materials, they create an amazing project.  Using natural wood siding materials with something produced in a factory, enhance the curb appeal.  The look is modern, while emphasizing a natural rustic theme to create a warm look.  The horizontal shiplap combined with the vertical lines in the metal give the home a lot of texture in the varied siding materials.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line is offered in two wood species, Douglas Fir and Cedar.  All the products can be used for residential and commercial application.

Our pre-finished materials make a big difference in project quality, aesthetics and in timing.  The use of Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Kentucky
Products:  ranchwood™ product line in Northern and Western colors for siding in douglas fir wood.  Soffit material, garage doors, posts, and trim in Ebony color Charwood™.
Product Use:  1×10 channel rustic siding (northern color) in circle sawn texture and 1×8 shiplap siding (western color) in circle sawn texture.  Soffit 5/8” x 48”x96” plywood panels, 1×12, 2×4, 2×6, 1×4, trims, bands and faux beams all in douglas fir ebony Charwood™ color.  Patio posts all kiln dried ebony Charwood™ 8x8x8 douglas fir kiln dried material.

Kentucky’s bluegrass, bourbon, and Churchill Downs all pale to this home’s beauty.  This peaceful lakeside home exudes tranquility throughout.  Kentucky is known for hot, humid weather.  This builder kept that in mind with the stone at the ground level to offset the high dew level in Kentucky. Also providing adequate acclimation time all while selecting the right profile for the siding installation.  Montana Timber Products mills relief cuts on the back of boards to create air circulation behind the siding and help stabilize the board.  Sealing the entire board and providing touch up sealant for cut ends, ensures each board is protected from the elements.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products: AquaFir™ product line in black color with smooth texture for siding, fascia, and trim in cedar.  Soffit and porch ceiling used black AquaFir™ 5/8”x48x96” wood panels and the 2^nd floor siding is reclaimed Corral board. AquaFir™  light brown timber pieces in douglas fir.

Product Use: 1×8 shiplap with 1/8” reveal for the first floor siding, 2^nd floor is 1×8 shiplap, window and door trim 1×4 and 1×8 fascia.

A cabin tucked away with a private hot spring designed with comfort and exclusivity.  Combining the black contemporary look with old corral board makes this cabin right at home in the middle of the woods.   Black cedar siding creates the clean lines, while the corral board finishes the look.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line is offered in two wood species, Douglas Fir and Cedar.  All the products can be used for residential and commercial application.

Our pre-finished materials make a big difference in project quality, aesthetics and in timing.  The use of Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  California
Products:  ranchwood™ product line in tackroom color with wire brush texture for siding, trim, and soffit materials all in cedar.
Product Use:  1×12 channel rustic vertical siding, 1×12 vertical shiplap siding, 1×12 garage cladding, 1×4 tongue and groove soffit, 1×12 garage trim, and 1×3 window and door trim.

This iconic location features the Hollywood sign as a neighbor and a great tranquil escape.  The modern house used wood siding and concrete to compliment the natural surround the hills provide.  Mixing a rustic element into the modern look softened the look and allowed the surrounding elements to create an urban feel away from the busy city below.

Montana Timber Products is a leading manufacturer of specialty pre-finished wood and reclaimed wood products.  Our process allows us to customize each order to meet the customers design needs.  This home combined channel rustic and shiplap profiles to create a unique one of a kind look.  The channel rustic profile leaves a 1” reveal between the boards (shown below).

When buying mill direct, ordering what you want is no problem.  Matching the trim, soffit and even garage material gives a cohesive look.  Select color, texture, profile, wood species, wood grade, and in the quantities needed for each project.   The materials are delivered directly to the job site stained, sealed, and ready to install.  To get started call 406-215-4961 or fill out the contact form at: http://www.montanatimberproducts.com/contact/

Where:  Montana
Products:  ranchwood™ Artisan product line in glacier grey raked texture for siding, trim, fascia, and soffit, all in douglas fir.
Product Use:  1×8 shiplap with 1/8” reveal horizontal and vertical siding, 1×6 tongue and groove soffit and vertical siding over the garage, 2×4 and 2×10 fascia, 1×3 and 1×6 trim.

ranchwood™ Artisan glacier grey blends the contemporary style with a flare of rustic inspiration for this project.  The timeless look for this mountain retreat using wood, stone, and concrete compliments the tranquil setting Montana provides.  Glacier Grey is a very versatile color, it has a lot of depth to provide a surprisingly different look with lighter and darker grey shades combined.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.

Where:  Vermont
Products:  AquaFir™ product line in battleship wire brushed siding and shale smooth texture for the trim, fascia, and soffit, all in douglas fir.

Product Use:  1×8 shiplap siding with 1×6 tongue and groove soffit, 1×8, 1×6 and 1×4 window, door, and corner trim, 1×12 and 1×10 frieze and horizontal band.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project. This product line is more contemporary in nature.  Specifically, this product is ideal when you are wanting a consistent uniform look.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling,, etc…

Wood selections:

It really comes down to what you are looking for, budget, and how you install it.  Douglas fir, the stability is good if you install the right fit for your job.  Selecting the right profile for your environment, not running it to the ground (doing metal or stone on the bottom of the house is best with any wood product).  Douglas fir can be more rustic looking with more knots and they range in size.  Cedar has dimensional stability, longevity, resistant to decay and has natural properties that deter insects.  The knots in cedar are very tight. In extreme climates, acclimation and installation are crucial. Montana Timber Products helps by stabilizing any board wider than 6″ by doing relief cuts. Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment to protect the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  http://www.montanatimberproducts.com/contact/.