Where:  Oklahoma
Products:  ranchwood™ Artisan product line in Ash color with raked texture.  Substrate is kiln-dried Douglas Fir.
Product Use:  A combination of 1×3, 1×4, 2×3, 3×3 and 4×4 siding all in square edge profile.

A distinctive aesthetic was implemented for the exterior cladding of this Oklahoma City residence.  Overlaid square edge boards make up a grid pattern on the lower half of the home which is juxtaposed with the upper half clad in corrugated metal.  MTP customize milled all boards to the exact design specifications.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where:  Colorado
Products:  AquaFir™ product line in brown color with raked texture for siding, soffit, deck trim, window trim, decking, fascia, and faux beam wrap.  Wood substrate is kiln-dried douglas fir.
Product Use:  1×8 vertical shiplap siding, with 1×6 tongue and groove overhangs, and 2×6 tongue and groove decking.  2″ thickness boards varied in widths used for all trim and beam wraps with widths from 4″ to 12″ wide.  All material has been treated for fire protection with Fireline™.

Fireline™ treatment is available in all product lines in two wood substrates (douglas fir or cedar).  The treatment solves for WUI (Wildland Urban Interface) code compliance without sacrificing the beauty of real wood.  Choose Fireline™ for peace of mind with your natural aesthetic.  Select your color and let’s get started today.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where:  Truckee, CA
Products:  AquaFir™ product line in custom color siding and soffit in smooth texture.  Wood substrate is Clear Vertical Grain Cedar.
Product Use:  1×8 tongue and groove with ¼” reveal for the horizontal siding. Soffit material 1×4 tongue and groove is all Fireline™.

Fireline™ treatment uses a vacuum pressure impregnation process to remove moisture and air from the wood cells and replace it with additives.  The fire treatment lasts the useful life of the wood product.  Fireline™ is a compliant option for homes in the Wildland Urban Interface (WUI) zone.  When projects require the extra protection Montana Timber Products offers a solution without sacrificing the character of the natural wood material.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in shale colored siding with charcoal colored trim in wire brush texture. The porch ceiling is hazelnut colored with a smooth texture.  Wood substrate is douglas fir, all kiln dried.
Product Use:  1×6 shiplap (vertical) used in the gables, 1×8 shiplap with 1/8” reveal (horizontal), 1×6 tongue & groove soffit and porch ceiling, 2×6 window, door, and corner trim, garage trim and transition band at the gables are 2×8 square edge material.  Gable timbers and porch posts are 6x6x8 FOHC (free of heart center) kiln dried with re-sawn texture.

AquaFir™ is finished with a semi-transparent stain that doesn’t hide the grain.  This allows the natural wood product to create variation and be versatile for any design need.  SEAL-ONCE® is a water based clear sealant used to seal the entire board before leaving the mill.   All product lines are textured, profiled, stained, and sealed before shipping directly to the designated location.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  Each product line can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc..  All the products can be used for residential and commercial application. Every order is customized authentic natural wood material.  Select your wood species, wood grade, color, texture, and profile with the help of our expert staff.  With 6 product lines, 7 profiles, 6 textures, 2 wood species in 3 grades, there is something for every design and budget.

Each product line is offered in two wood substrates, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best. Complimentary samples to assist you with color and texture selection. Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where:  Idaho
Products:  AquaFir™ product line in white with circle sawn texture. Wood substrate is douglas fir, all kiln dried.

Product Use:  1×6 shiplap with 1/8” reveal horizontal siding.  1×4 window and corner trim.

AquaFir™ is offered in 3 textures: smooth, wire brush and circle sawn, each offer a different look and change the appearance to personalize the project.  Along with different textures and profiles, you can customize your wood species, with douglas fir or cedar. All of our product lines can be used for siding, timbers, trusses, posts, beams, decks, siding, trim, fascia, soffit, interior paneling/ceiling, etc…

In extreme climates, acclimation and installation are crucial.  Montana Timber Products helps by stabilizing any board wider than 6” with relief cuts.  Relief cuts (kerf cuts) are milled on the back of the siding and create air circulation.  In addition to relief cuts, Montana Timber Products uses SEAL-ONCE® to seal the entire board in a controlled environment, protecting the wood from water damage.  Ask your sales representative for guidance to find what grade of wood and species best fit your needs.

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where: Texas
Products:  ranchwood™ product line in southern finish color with circle sawn texture. Wood substrate is douglas fir.
Product Use:  1×12 board and 1×3 batten and 1×6 trim.  8×12, 8×8, 4×8 posts in circle sawn texture all FOHC #1 kiln dried timbers.  Rafter tails 2×6 and 3×6 in douglas fir material. Garage door and barn door material is 1×6 and 2×6.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (douglas fir or western red cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where:  Montana
Products:  AquaFir™ product line in bronze cedar finish color and smooth texture.

Product Use:  1×8 horizontal shiplap with 5/8” reveal siding with 1×6 tongue and groove overhangs, and 2×12 rafter tails.  Wood substrate is western red cedar.

AquaFir™ can be provided in either douglas fir or cedar wood species.   AquaFir™ offers multiple texture options including smooth, wire brush, and circle sawn.  The smooth texture on this home refined the mountain modern design.  AquaFir™ is also offered in 17 color options.

We get asked all the time what the siding looks like after it is aging.  On this project, the siding was installed in April of 2018 and photographed August 2020.  The sealant (Seal-Once) and tint have UV protective properties to protect the color. Individual color retention will depend on the exposure to sunlight and other natural conditions.  Re-application of the tinted sealant should be applied typically every 4-7 years depending on the conditions and individual preference.   Seal-Once is water-based non-toxic, ultra-low VOC, and has low odor so it is safe and easy to reapply. Maintenance information can be found at:
https://www.montanatimberproducts.com/wp-content/uploads/2017/06/Montana-Timber-Installation-Acclimation-and-Maintenance-of-Wood-Products.pdf

Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar in various grades, talk to a Montana Timber Products representative to find out what fits your design and budget best.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where: Wisconsin
Products:  ranchwood™ product line in three colors southern, western, yellowstone, and one AquaFir™ color shale for exterior siding and interior accents all in douglas fir wood.
Product Use:  1×6 shiplap (mixed equally in color) in wire brush texture.  Interior wall 1×4 shiplap (mixed equally in color) in wire brush texture.  The trim and doors are in southern color in 1×8 and 1×6 square edge material.  Faux beam wrap is all 1×10 and 1×8 material in southern color all in wire brush texture.  Window flower boxes are 1×8 shiplap mixed colors and trimmed in southern square edge boards.

Montana Timber Products offers 4 product lines in douglas fir or cedar wood species (each in three grades).  Along with corral board an authentic reclaimed wood.   Materials are available in 4″, 6”, 8”, 10” and 12″ wide boards in lengths ranging from 4ft to 16ft long (doug fir or cedar).  Available in 6 profiles (shiplap, square edge, square edge lap, shiplap reveal, tongue and groove, channel rustic) and 3 textures for the AquaFir™ and ranchwood™ products (smooth, wire brushed, circle sawn), ranchwood™ Artisan is ONE texture (raked) and Charwood™ is its own texture from the burning.  Thickness offered is 1″,5/4 (cedar only), 2″ as standards and then timbers/posts in 3+ inches.  The board will come profiled, textured, stained on one side (unless you designate needing more sides stained) and sealed on all 4 sides with our seal once.  Call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/.

Where:  Northern Idaho
Products:  ranchwood™ Artisan product line in ash and glacier grey raked texture for siding and interior accent use all in douglas fir.
Product Use:  1×6, 1×8, and 1×10 mixed equally in ash and glacier grey shiplap vertical siding and interior use.

The ranchwood™ Artisan product line creates a reclaimed look with the contrasting highlights and character each color offers. This project mixed board widths and colors to create a unique aesthetic. The craftsmanship shown in the ranchwood™ Artisan product line is a multifaceted work of art. Using glacier grey and ash in three sizes on the exterior and interior of the home, create a unique aesthetic with subtle variations a natural wood product provides.

Montana Timber Products is a specialty wood products manufacturer of rustic, modern and contemporary wood siding, interior accents, reclaimed wood, and barn wood alternatives.  Our ranchwood™, AquaFir™, ranchwood™ Artisan, ranchwood™ weathered, Charwood™, and Corral Board product lines offer a full selection of exterior and interior wood materials.  All the products can be used for residential and commercial application.  Each product line is offered in two wood species, Douglas Fir and Cedar.  Seal-Once offers high performance long lasting waterproofing seal that is environmentally friendly non-toxic protection.  Selling direct to the customer and custom milling each order allows Montana Timber Products flexibility to create your project.  Call 406-215-4961 for more information or fill out the contact form at: https://www.montanatimberproducts.com/contact/.

Where:  Wyoming
Products:  ranchwood™ Artisan dusk in cedar and a custom Charwood™ color in douglas fir CVG (clear vertical grain). Both colors are pressure treated to be fire-resistant with Fireline™.
Product Use:  1×6 shiplap for the dusk cedar material, 1×6 tongue and groove profile on the Douglas Fir CVG custom Charwood™ material.

The Cloudveil Hotel (An Autograph Collection Hotel by Marriott) was designed to provide luxury and tranquility amid a setting that calls to the mountain naturescape and western heritage of Jackson Hole.  Our team worked closely with the design and construction teams to meet the exacting details that this project required.  All exterior wood siding was manufactured with our Fireline treatment to meet the stringent fire resistance standards.  There are two distinct siding elements that were created specifically for this project to meet the inspired aesthetic vision. Time and again, Montana Timber Products has proven to be the manufacturer of choice for both architects and contractors to provide natural wood siding elements on extraordinary projects.

The hotel used Montana Timber Products pressure treated fire-resistant materials. All the product lines can be pressure treated for effective fire-resistant properties in douglas fir and cedar. Fireline™ is available for interior and exterior use, consult with a sales rep to get additional information on Fireline™ and get your project started.

Montana Timber Products offers five product lines in more than 40 colors, each of these product lines can be used on:  timbers, fabricated trusses, posts, beams, glulam beams, decking, siding, trim, fascia, soffit, interior paneling, and cedar shakes.  Each product is stained and sealed in a controlled environment, ready to install in any weather condition.  Clients can select from the five product lines, two wood species in three grades, six profiles, and four textures to create their perfect project.  All products can be used for commercial and residential application.  Our products can fit any architectural design from mountain rustic, modern rustic and contemporary.  All with mill direct pricing, exceptional quality, consistency, shipping throughout North America and flexibility to customize each order.  Get started today call 406-215-4961 for more information or fill out the contact form at:  https://www.montanatimberproducts.com/contact/